Andrew Antelao Spiked SPX Class 3 Boot
3.0mm Perwanger leather upper with Kevlar Class 3 chainsaw protection and a Sympatex 100% waterproof membrane, windproof and highly breathable. Rubber rand for enhanced protection of the leather upper, with additional arch support, maximum stability, and rigid flex.
BEST SUITED FOR: Woodsmen, foresters, wood workers, farmers, gardeners, tree climbers, builders and similar activities
Available Sizes
Construction
Upper: Premium full grain 3.0mm Perwanger leather, padded double tongue, leather collar, heel billow, Kevlar chainsaw protection class 3
Membrane: Sympatex Moisture Tech
Midsole: Rubber
Outsole: Andrew Duramax Spiked, replaceable carbon steel spikes 15/64 imperial thread
Rigidity: Rigid
Footbed: Iso-therm-memory foam-leather
Weight: 1355gm (size 42)
Sole Info
An ultra hard all rubber block heel sole with 27 receptacles and Champ carbon steel 15/64 imperial spikes.
Giving great traction on logs and slippery surfaces.
The spikes are replaceable.
Safety Info
SAFETY STANDARDS & CERTIFICATIONS CLASS 3 CHAINSAW PROTECTION
In accordance with EN ISO 17249:2013
WARNING: CAREFULLY READ THIS INFORMATION NOTE BEFORE USING THE ANDREW CUT-RESISTANT SHOES
Shoes for professional use are considered Personal Protective Equipment (PPR). They are therefore subject to the requirements of EEC Directive 89/686 (as amended), implemented in Italy with Leg. Decree no 475/92 (as amended) – which requires affixing of the CE marking for their marketing.
Our safety shoes are Category III Personal Protective Equipment subject to CE Certification by RICOTEST Notified Body (certificate N. 0498), Via Tione 9 – 37010 Pastrengo VR – Italy. (www.ricotest.com), and subject to the type conformity assessment procedure based on internal production control together with product tests carried out under official control at periodic intervals (form C2) under the supervision of the RICOTEST notified body (no. 0498)
WARNING: As well as the basic requirements prescribed by this standard, the safety footwear must satisfy one of the following performance levels according to the speed of the saw used:
LEVEL 3: resistance with saw speed of 28 meters per second
Conforming to the basic requirements of standard EN ISO 17249:2013, safety footwear with resistance to chainsaw cutting (Tab. 1-2-3-4 of EN ISO 17249:2013)
Performance level achieved by LEVEL 3 (speed of test chainsaw 28 m/s) +
Additional requirements: P = resistance to penetration of the sole of the footwear. The footwear is marked on the outside of the upper with the following pictogram:
KWF Certification
The KWF certification mark is issued by the German body that provides Safety Certification in the forest technology sector and the organisation specialising in matters regarding safety for equipment and compliance with safety regulations. Leading makers of chainsaws and protective equipment for professional use have their products tested and approved by the KWF.
EN ISO Certification
EN ISO 17249:2014
Chainsaw Protection
Level 3 Serious Risk
Chain Speed 28m/s
EN ISO 20345:2011
Safety Standard
S3, E, SB, WRU, SRC, P
Other Items
View your shopping basket or Browse other items in Forestry & Safety Boots.
